HOT ! AQUAZONE AQUAECO Mono Sensor Tap｜ Other Products

The AQUAZONE AQUAECO Mono Sensor Tap is WRAS approved and provides all the essentials required of an infra-red basin tap including a low flow rate for water savings enhanced by a flow reducer.
It comes with a power adapter and a battery component, so that you have the flexibility to choose which method of power supply you prefer or require depending upon the location.
Users are supplied with cold or premixed warm water from a tough and durable tap with vandal resistant properties, yet elegantly styled with a chrome finish surrounding its high-quality brass interior.
Being WRAS approved it demonstrates compliance with the Water Supply (Water Fittings) Regulations or Scottish Byelaws which require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard.
It’s suitable for a host of locations due to the flexibility of a minimum and maximum water pressure range between 0.2bar and 5bar, however for peak performance its recommended water pressure minimum is no less than 1 bar.
The box includes a base plate, 1/2” nut and 600mm flexi pipe.
Technical Description
AQUAZONE AQUAECO Mono AQE-ECO-I301-CP is a WRAS approved Infra-red brass basin tap with polished chrome finish. Deck mounted using a drill hole diameter of 30-32mm. The spout has a 140.00 mm projection. Battery operated using 4 X 1.5 AA batteries *not included* or mains supplied using the included 220-240V power adapter. Recommended minimum cold or premixed warm water pressure is 1 bar (0.2 – 5 bar range). A 3 bar pressure gives a flow rate of 5lpm. A connector size of 1/2” is required.
Brand:AQUAZONESKU:AQE-ECO-I301-CPFinish:Polished Chrome